Die angegebenen Abmessungen in mm sind nicht verbindlich. Technische Änderungen bleiben vorbehalten.

---

Warnings:
1) Please note that the VDE-Directives do not allow the combination of electrical and liquid connectionswithin the same connector for clear safety reasons.
2) CRM/F CX code pins and guides must be used for pneumatic contacts modules.
These pins also provide coding if pneumatic contacts modules are used exclusively.

Use of units for pneumatic contacts
- pneumatic contacts for pressure values up to 10 bar, for use with clean and dry compressed air
- contacts for gas and liquids on request (see warning)
- possibility of using tubes with different diameters in the same modular unit
- female contacts with or without closing valve
- use of tubes with Ø 1.6 - 3 - 4 - 6 - 8 - 10 mm, and possible replacement of tubes with assembled units. Tube with:

• ID inner Ø (push-over attachment of tubes over barbed straight contacts):
CX xx PF/M, CX 1.6 VC, CX xx MPF/M, CX xx MPV, CX xx VC

• OD outer Ø (push-in attachment of tubes to the quick-fitting contacts):
CX xx MPQF/M, CX xx MPAV, CX xx MPAF/M, CX xx MPQV

---